Mainline® Adapt-a-Valve TEST-EZE Gate
Product Description and Features
The TEST-EZE Tee was produced because there was a need for a safe, economical, and easy to use method for pressure testing DWV drainage systems. The TEST-EZE Tee can be used for extendible or non extendible pressure testing, horizontal and vertical pressure testing. This fitting is available for 3” pipe with a 4” riser for extendible applications. The test gate is a disc with an o-ring that slides into the Test Tee (o-ring on the ‘test side’)for pressure testing up to 50 psi (100+ feet). The Test Tee has two knockouts built into the body. By knocking out the knock-out and solvent welding a piece of ½” pipe and hose connection you may fill the system through the tee!
PRODUCT |
DESCRIPTION |
MODEL |
UNITS/CASE |
Extendable 3″ Adapt-A-Valve – Parts |
|||
66109 |
TEST-EZE Gate/Pressure testing |
ABAML3TZ |
24 |
Extendable 4″ Adapt-A-Valve – Parts |
|||
66114 |
TEST-EZE Gate/Pressure testing |
ABAML4TZ |
24 |
66115 |
TEST-EZE Gate/Pressure testing (bagged with key) |
ABAML4TZB |
24 |
Don’t see the product you need? Call Customer Service at 800-888-8312.