Classic Press-In Trim Kits – Push eN Lift Stopper
Product Description and Features
The AB&A Classic Press-In Waste and Overflow Kit makes it easier than ever to change your existing bathtub strainer and overflow cover plate, giving your tub a fresh new look. This tub trim kit includes a high-flow-capacity overflow plate that is slotted to provide greater drainage through the tub overflow, draining water at a rate of approximately 7 GPM (gallons per minute) compared to the output of a typical tub spout of 5-6 GPM. The Push eN Lift Stopper plugs the tub drain with a simple push and unplugs it with an easy pull. Designed for intuitive, tool-free installation, this waste and overflow kit features a convenient push-on overflow cover plate and a strainer cover that presses into place. The strainer cover is designed to fit AB&A 1-1/2-inch (11-1/2 TPI) strainers in both brass and zinc. Each unit is made of durable stainless steel with a rubber washer to ensure a tight fit. AB&A finish kits are available in a wide variety of finishes that offer a sleek look to accent any bathroom.
- Stopper is brass unless noted
- California Residents: WARNING – www.P65warnings.ca.gov
PRODUCT |
DESCRIPTION |
MODEL |
UNITS/CAS\E |
60170 |
Chrome |
ABA965033HF |
6 |
60111 |
Satin Nickel |
ABA96504SN3HF |
6 |
60115 |
Venetian Bronze |
ABA96504VB3HF |
6 |
60108 |
Oil Rubbed Bronze |
ABA96504ORB3HF |
6 |
60116 |
White |
ABA96504W3 |
6 |
60322 |
Champagne Bronze |
ABA96504CB3HF |
6 |
60321 |
Matte Black |
ABA96504MB3HF |
6 |
Don’t see the product you need? Call Customer Service at 800-888-8312.