Flush Mechanical Cleanout Repair Plug

Product Description and Features

Specifically designed for use in cast-iron fittings where the threads have been damaged, the Test-Tite Flush Mechanical Cleanout Repair Plug restores functionality to cast-iron cleanout tees. This cleanout plug features an innovative design that creates a seal with the smooth surface behind the damaged threads to provide an airtight seal. Compatible with all brands of cast-iron fittings, this repair plug sits completely flush inside and out of the tee and cannot fall into the pipe. Once installed, it creates an airtight seal that holds up to 50 feet of backpressure. A stainless-steel flathead screw and wrench are included.

  • Holds up to 50 feet of back pressure
  • Seals air tight (Does not rely on threads to seal.)
  • Back pressure actually increases sealing ability
  • Center is tapped for screw, and can be covered with cleanout cover
  • Completely flush inside and out
  • Stainless Steel flast head screw
  • Cannot fall into the pipe
  • Comes with wrench
  • California Residents: WARNING – www.P65warnings.ca.gov

PRODUCT

DESCRIPTION

MODEL 

UNITS/CASE

83687

2″ Flush Mechanical Cleanout Repair Plug

FCRP2

10

83688

3″ Flush Mechanical Cleanout Repair Plug

FCRP3

10

83689

3-1/2″ Flush Mechanical Cleanout Repair Plug

FCRP35

10

83690

4″ Flush Mechanical Cleanout Repair Plug

FCRP4

10

Don’t see the product you need? Call Customer Service at 800-888-8312.