Single Shot® Insulating Suspension Clamps
Product Description and Features
Ensure pipes are securely installed while reducing irritating pipe noise with the Water-Tite Single-Shot Plastic Insulating Suspension Clamp with Preloaded Nail. Designed to support all CTS (copper tube size) tubing, this plastic clamp minimizes noise associated with pipe expansion and contraction and features a stabilizing foot to eliminate rocking or movement of the clamp and pipe. Ruggedly designed, this tube suspension clamp is impact resistant to 0 degrees Fahrenheit (-18 degrees Celsius) and is capable of withstanding continuous maximum temperatures of up to 160 degrees Fahrenheit (71 degrees Celsius). It is available in sizes that support 1/2-, 3/4-, or 1-inch pipe.
- Available in ½", ¾" and 1" CTS sizes
- Compatible with copper, CPVC and PEX tubing
- Preloaded nail significantly reduces installation time
- Key-hole closure assists in pre-hanging of pipe
- Stabilizing foot eliminates rocking or movement of clamp and pipe
- Job cost is reduced through preloaded nail and labor savings
- Reduces noise due to expansion and contraction of supply tube
- Securely supports the weight of the CTS piping system when installed at 6' or less interval spacing, as per local codes
- Impact-resistant to 0°F (-18°C) Max. Temp: 160°F (71°C) continuous
- California Residents: WARNING – www.P65warnings.ca.gov
PRODUCT |
DESCRIPTION |
MODEL |
UNITS/CASE |
82980 |
1/2″ Single Shot Insulator with Preloaded Nail (50/bag) |
SS512 |
1000 |
82981 |
3/4″ Single Shot Insulator with Preloaded Nail (50/bag) |
SS534 |
1000 |
82982 |
1″ Single Shot Insulator with Preloaded Nail (50/bag) |
SS501 |
500 |
Don’t see the box you need? Call Customer Service at 800-888-8312.