Center Drain Galvanized Washing Machine Outlet Boxes with Duplex & Dryer Receptacles

Product Description and Features

Ensure your washing machine is properly connected to piping and increase living space by fitting it closer to the wall with the Guy Gray Galvanized Steel Center-Drain Washing Machine Outlet Box. This recessed outlet box is designed to be installed in the stud bay, increasing living space and allowing for any hose leaks to be captured in the box. It features a center-positioned drain opening and includes a male-threaded drain fitting and locknut. Made of 20-gauge galvanized steel, this outlet box (with faceplate) is available in a variety of different configurations of valves, drain fittings, and electrical receptacles.

  • 20 Gauge Box / 20 Gauge Faceplate
  • G90 Hot Dipped Galvanized Steel (Unpainted)
  • Male Threaded Drain Fitting & Locknut Included
  • Duplex Receptacle: 20 Amp, 125 Volt
  • Dryer Receptacle: 30 Amp, 250 Volt
  • Available with GFCI Receptacle: 20 Amp, 125 Volt
  • Rough Opening: 14 1/4" W x 8 3/4" H x 3 1/2" D
  • Dimensions: 15 3/4" W x 9 1/2" H
  • California Residents: WARNING – www.P65warnings.ca.gov

 

 

PRODUCT

DESCRIPTION

MODEL

UNITS/CASE

82028

1/2″ MIP/Sweat Conx. Valve, 1-1/2″ Threaded Drain Fitting

BED150

6

82034

1/2″ MIP/Sweat Conx. Valve, 2″ Threaded Drain Fitting

BED200

6

81978

1/2″ MIP/F1807 Valves, Duplex & 3 Wire Receptacle

BED200P

6

82038

Top-mount 1/2″ MIP/Sweat Conx. Valves, 2″ Threaded Drain Fitting

BBED200TS

6

 

With GFCI Receptacle

82632

1/2″ MIP/Sweat Valves, 1-1/2″ Threaded Drain – GFCI & 3 Wire Receptacle

BED150GF

6

82634

1/2″ MIP/Sweat Valves, GFCI & 3 Wire Receptacle

BED200GF

6

82679

1/2″ MIP/F1807 Valves, GFCI & 3 Wire Receptacle

BED200PGF

6

82637

Top Mount 1/2″ MIP/Sweat Valve, GFCI & 3 Wire Receptacle

BBED200TSGF

6

 

97093

Replacement Faceplate for Models BED, BBED, WBED, & FBED; 20 Ga. Galvanized1

BED

1

 

Don’t see the product you need? Call Customer Service at 800-888-8312.